top of page

How Do You Install the WeBoost 470145 Home Complete?

Updated: Apr 11

The WeBoost 470145 Home Complete is your solution for boosting cell signals across multiple rooms, ensuring that calls and mobile data are crystal clear. Follow this easy guide to set up your WeBoost system and say goodbye to frustrating signal drops!

Unboxing Your WeBoost Kit

First things first: unbox your WeBoost 470145 Home Complete kit. Inside, you should find the following components:

  • Outdoor Antenna - Captures the signal from the cell tower.

  • Indoor Antenna - Distributes the amplified signal inside your home.

  • Amplifier - Boosts the signal strength from the outdoor antenna.

  • Cables - Connects all components.

  • Power Supply - Powers the amplifier.


Step 1: Choosing the Right Location for the Outdoor Antenna

The outdoor antenna should be placed where the signal is strongest. This could be on your roof, attic, or even a window that faces the nearest cell tower. Use apps like Cell Mapper or websites like OpenSignal to find your nearest cell towers and determine the best placement. The goal is to have a clear line of sight to the tower, avoiding obstacles that might block the signal.

Step 2: Mounting the Antenna

Once you've identified the best spot, mount the outdoor antenna using the included brackets. Make sure it is securely attached and pointed towards the nearest cell tower. The higher you can place this antenna, the better the signal reception will be.

Step 3: Connecting the Amplifier

Position the amplifier near a power source but away from excessive heat or moisture. Connect the outdoor antenna to the "Outside Antenna" port on the amplifier using the provided coaxial cable. Ensure all connections are tight and secure to prevent any loss of signal.

Step 4: Setting Up the Indoor Antenna

The indoor antenna should be placed in the area where you most often experience poor reception. This could be your living room, home office, or basement—wherever you need improved signal the most. Connect the indoor antenna to the "Inside Antenna" port on the amplifier.

Step 5: Powering the System

Once all components are connected, plug the power supply into the amplifier and then into a wall outlet. The amplifier will begin boosting the signal between the outdoor and indoor antennas. Look for the lights on the amplifier to indicate that everything is functioning correctly.

Step 6: Testing and Adjusting

With everything set up, it's time to test your new system. Make a call or use your data services from various locations inside your home to check the signal strength. If necessary, adjust the placement of the indoor antenna or reorient the outdoor antenna slightly to optimize performance.

Enjoy Your Enhanced Signal!

Congratulations! You should now enjoy enhanced cell reception throughout your home. No more dropped calls or slow data speeds. With the WeBoost 470145 Home Complete, you can stay connected effortlessly.

Remember, the installation might require some trial and error to get perfect results. If you encounter any issues, don't hesitate to contact WeBoost customer support for assistance or refer to the detailed guide and troubleshooting tips included with your kit.


Net All Over was founded by one of the innovators of Wireless Internet (Wi-Fi) service, having designed one of the first outdoor wireless Internet networks in the U.S. in 1996. Our goal is to provide high-speed Internet service to rural or low-service areas that either have no competitive alternative – OR – have no high-speed choice at all.

For inquiries:


bottom of page